Creative Spaces - Alcove

DKK 40.00

by plan b design.

ALCOVE , THE MICRO-ARCHITECTURE THAT UNITES US

Individual paces the public space. Time for concentration, group work.

By configuring these acoustic modules, we convert open areas into semi-private spaces that encourage teamwork and collaborative dynamics between users.

These spaces adapt perfectly to the need for privacy without completely isolating you from the work environment. With a design which combines elegance and functionality, Alcova is the perfect retreat to stimulate creativity and strengthen interpersonal relationships through out the institution or office.

Variants:
2 person and 4 person version.
With or without electrification.


by plan b design.

ALCOVE , THE MICRO-ARCHITECTURE THAT UNITES US

Individual paces the public space. Time for concentration, group work.

By configuring these acoustic modules, we convert open areas into semi-private spaces that encourage teamwork and collaborative dynamics between users.

These spaces adapt perfectly to the need for privacy without completely isolating you from the work environment. With a design which combines elegance and functionality, Alcova is the perfect retreat to stimulate creativity and strengthen interpersonal relationships through out the institution or office.

Variants:
2 person and 4 person version.
With or without electrification.


 

Detailed information

  • ALCOVE for 2 people

    Width 180 cm
    Depht 90 cm
    Height 134 cm


    ALCOVE for 4 people

    Width 180 cm
    Depht 160 cm
    Height 134 cm

  • FRAME

    Upholstered panels made of two 10-mm thick halves with an average density of 700/650 kg/m3 and 5-mm thick foam with a density of 60 kg/m3 on each outer
    face; glued together with water-based adhesive.
    The enclosure rests on the floor via a black metal plinth made of 30x30x1.5-mm profiling as per UNE-EN 10305.


    SEATS

    Upholstered seats made of foam with a density of 40 kg/m3 mounted on 16-mm thick melamine. The seats are supported at the rear by two metal legs made of
    50x50x1.5-mm profiling as per UNE-EN 10305 with plastic levelling studs. At the front, there is a beam made of 50x30x1.5-mm metal profiling as per UNE-EN 10305
    the length of the seat which is screwed to the upholstered panels that make up the enclosure.
    The backrest is made of foam with a density of 30 kg/m3 on a 5 mm MDF support which hangs from the upholstered panel with plastic hanging brackets.


    TABLE

    Top made of 25-mm thick chipboard bonded with synthetic resins, specially designed for applications that require high bending strength.
    Average density: 620/595 kg/m3 as per EN 323. With 2-mm thick ABS edge as per UNE 56.843:01.

    Alcoba table for 2 people: The front leg is a welded assembly consisting of a Ø40 vertical tube with a 4-mm thick sheet metal washer at the top to screw to the table top and
    ending in a leveller.

    Alcoba table for 4 people: The front leg is a welded assembly consisting of a Ø70 vertical tube with a 4-mm thick sheet metal washer at the top to screw to the table top.
    The leg ends in a plastic cap at the bottom.

    In addition to the front leg, the table is anchored to the upholstered panels at the rear. The fastener holds the table up, joins the rear panels together and provides the mains
    connection if the Alcoba has an electricity supply.

  • 3d, dwg
    2d, dwg

  • download technical information